You have no items in your shopping cart.
The easy to remove shroud ensures easy access to the belt-drive system for maintenance and servicing without removing the pedals or crank.
The self-powered UBK 835 upright bike features custom-designed handlebars with integrated touch heart rate for maximum comfort and efficient workout experience. One-handed seat adjustment on or off the bike, redesigned saddle for riding comfort and improved knee over pedal spindle (KOPS) geometry for efficient pedalling mean a smooth, comfortable workout.
The easy to remove shroud ensures easy access to the belt-drive system for maintenance and servicing without removing the pedals or crank.
Over-molded handle bars add comfort and durability while offering heart rate contacts and three ergonomic riding positions: upright, cruising and road. The simple seat adjustment allows the user to change the position of the seat with one hand, either on or off the bike.
Finally, an LED console that works harder for you, your servicers, and your exercisers. Get integrated asset management to supercharge your service techs with extra information, right at their fingertips. Exercisers will enjoy the well-placed channel and volume change controls.
Equipment Features
Covers |
Covers are attached with minimal hardware and can be removed without taking off the pedals or cranks. |
Cable Management |
Optional |
Accessories Holder(s) |
Yes |
Transport Wheels |
Integrated |
Frame |
Two-step powder-coating process applies rust-resistant undercoat and cosmetic topcoat to steel frame. |
Bearings |
The bottom bracket assembly uses a hardened steel shaft with deep-groove sealed precision ball bearings designed for smooth operation and exceptional service life. |
Seat |
Ergonomic saddle design with comfort groove. 10.5 inches (27 cm) width quickly tapers to a narrow nose for improved riding comfort. Optional universal seat post allows easy installation of different saddle types. |
Handlebars |
A new over-molded handlebar design offers the user three comfortable riding positions-upright, cruising, and road. In the road position, the ergonomic-shaped handlebars position the wrists in a natural, neutral position. The wide width of the handlebars provide stability and comfort along the entire forearm. The overall width of the handlebars is similar to indoor cycling bikes, which is narrower than most stationary bikes. This places the user in better ergonomic position with the forearms more directly under the shoulders. In the cruising position, the wide handlebar is more comfortable on the user's hands. Touch heart rate is integrated in the upright and road-race positions. |
Pedals |
For double the convenience, dual-sided pedals allow the rider to use the pedals with or without the integrated pedal strap. The extra wide pedal comfortably accommodates feet of all sizes, which allows proper pedaling form with the foot directly over the user's knee. |
Biomechanics |
To achieve proper pedaling biomechanics, the seat post and seat post offset from the crank is key to aide in efficient pedaling and reduced shear force on the knee. The seat post angle is 74 degrees with a 5 inch (13 cm) offset from the crank axle. This places the forward knee directly over the ball of the foot (or pedal spindle) when the pedals are in a horizontal position. |
Resistance System
Minimum Watts |
18 watts (level 1 at 20 RPM) |
Maximum Watts |
750 watts (level 25 at 150 RPM) |
Resistance Levels |
25 |
3-Piece Crank |
3-piece crank tightens positively, reducing the need for periodic adjustments. The 170 mm crank arm accepts any standard road or mountain bike pedal. |
Drive System |
The two-stage drive system yields a smooth, comfortable, quiet operation with a lower start-up resistance and more consistent resistance progression than single-stage drive systems. |
3-Phase Generator |
3-phase generator / eddy current resistance system requires no backup battery in order to efficiently power the bike. |
Belt Drive |
Belt drive for smoother, quieter operation and reduced maintenance. |
Power Requirements
Equipment |
Self-Powered |
International 240 VAC |
Applicable country-specific power cord |
U.S. & Canada 120 VAC |
120V/15A circuit with 5-15R NEMA receptacle |
Personal Viewing Screen (PVS) |
Powered |
Optional Power Supply |
Optional power supply available if long time periods of no use or need display to be continuously lit longer than 30 seconds after workout ends. |
Console Features
Electronic Readouts |
18 Readouts |
Numeric Keypad |
Yes |
Motion Controls |
Yes |
QuickStart™ |
Yes |
Tactile Dome Keys |
Yes |
Units Selection |
Metric or U.S. Standard |
Console Language(s) |
English, French, German, Italian, Japanese, Portuguese, Russian, Spanish |
Maximum Workout Time |
unlimited |
Preset Programs |
12 programs accessed by 6 keys: |
Console Type |
Advanced LED Display |
Pause Range |
1 to 60 seconds |
Default Pause Setting |
30 seconds |
Heart Rate Monitoring
Touch |
Yes. Touch heart rate sensors conveniently located on the handlebars in both the upright and road positions. |
Telemetry |
Yes. Integrated telemetry heart rate reads heart rate from a user's heart rate chest strap. |
Network Capabilities
Diagnostics |
Ability to set club parameters, e.g. limit exercise time, set default language and pause time. |
CSAFE Ready |
Yes |
Equipment Dimensions and Weight
Height with PVS |
72 inches / 183 cm |
Length |
48 inches / 122 cm |
Width |
21 inches / 53 cm |
Equipment Weight |
160 lbs / 73 kg |
Height |
60 inches / 152 cm |
Shipping Dimensions and Weight
Length |
51 inches / 131 cm |
Width |
28 inches / 71 cm |
Height |
54 inches / 137 cm |
Shipping Weight |
178 lbs / 81 kg |
Equipment Specifications
Maximum User Weight |
350 lbs / 159 kg |
Standard Frame Colors |
Gloss Metallic Silver |
Regulatory
FCC |
FCC |
ETL |
ETL |
CE |
CE |
EN957 |
EN957 / ASTM |
Home Warranty
Frame and Welds |
Lifetime |
Parts and Wear Items |
10 Years |
Console |
3 Years |
Labor |
1 Year |
Commercial Warranty
Frame and Welds |
7 Years |
Motor |
5 Years |
Parts* |
3 Years |
Console/Screen* |
3 Years |
Labor |
1 Year |